WINCHMAX CETOP5/NG10 Solenoid Valve, Manifold Subplate and Remote Control

Description

CETOP5/NG10 High Flow Wireless Remote Control Operated Modular Directional Control Valve with Pressure Regulator Manifold Block.
Wireless high flow directional control for larger hydraulic winches or where higher speeds are desirable.

Solenoid Operated Directional Hydraulic Control Valve, CETOP5/NG10 Three-Position 24V
Solenoid-operated directional spool valve used to start, stop and direct the oil flow.

Features

• Double 24V Coils.
• High Flow up to 120l/min.
• Removable DIN plug connector with clear cover, cable gland and LED indicator.
• Configuration; Spring centred P open to Tank, A & B Blocked.
• Max Pressure P,A,B, 31.5 Mpa (350 bar / 4500 psi).
• Manual override feature.

Manifold Subplate Cetop5/NG10 Hydraulic
These steel plate covers have been designed to replace valves on the steel manifold and work to provide a pressure blank, which will enable the remaining station to operate. A manifold subplate with reliable relief valves will improve your system’s overall safety and precise control.

Features

• Forged Steel Construction.
• Side Ported P,T,A,B.
• Port size 1/2 inch BSP

Winch Remote Control, Wireless. Twin SL Handsets. Long Range Wireless with Enclosure, 24V
Converts a 24V solenoid operated direction valve on a hydraulic winch from manual switching to the long-range wireless remote control.

This new and innovative design combines the mm precision control of a manual wander lead system with the convenience of a wireless system. The robust handheld controllers can be plugged into the control box in the usual way or disconnect the cable and with the press of a button, the handheld controller becomes fully wireless.

Features

• Supplied with two large grip handheld controllers.
• Can be used tethered (with control cable supplied) or fully wireless.
• Operating Range over 30m / 100ft).
• Improved components for better reliability, range and battery life.
• Control box housing a wireless receiver and fitted with a socket for optional wander lead connection.
• 8m control box power supply leads fitted with ring terminals.
• 250mm output cables to connect to the coils on an existing solenoid control valve.
• Approximate control box size 75mm x 105mm x 60mm, two lugs for convenient fixing.
• Easy to fit, full installation instructions supplied.

Industry-leading lifetime warranty on mechanical components & 3yrs warranty on electrical.
VAT invoice provided with every sale.

4WE10 Solenoid Direction Control Valve
Max. flow rate / 1/min)	120
Max. working pressure (MPa) A, B, P port	31.5
Max. working pressure (MPa) T port	16
Double solenoids type Weight (kg	6.2
Hydraulic fluid	Mineral oil
Seal material	NBR seals
Temperature range (°C)	-30 to +80
Viscosity range (mm2/s)	2.8 to 500
Oil cleanliness class according to IS0 4406	Class 20/18/15

Additional information

Weight	6 kg
Dimensions	200 × 100 × 200 cm