10500 LB. HYDRAULIC WINCH| H10500

Description

Ultimate freedom and versatility with the Mile Marker H10500 hydraulic winch. Independent control valve and front/rear mounting options for any recovery need.

DESCRIPTION

The Mile Marker H10500 Series hydraulic winch is independent from its solenoid control valve to give more freedom in application and can be mounted to the front or rear of the vehicle as a permanent or detachable recovery system. Utilizing the vehicle’s power steering system as its power source ensures the H10500 to run continuously without draining the battery. Completely element proof construction, corrosion and water resistant, the H10500 features two speed spooling, a mechanical lock system, stainless steel tie bars and fasteners, 100’ of steel cable, 10,500 pounds of pulling capacity and requires a vehicle specific 34 Series valve adapter kit for installation and operation.

Main Features:

•100% Duty Cycle
•2 Speed
•Power Steering Pump Powered
•Submersible
•Stainless Steel Tie Bars
and Fasteners
• Ductile Iron Body
(H12000 Only)
•Reversible Mounting
(H9000 & H10500 Only)
• 3 Mounting Positions
(H12000 Only)
•Mechanical Lock
•Corrosion Resistant
•100’ Steel Cable
•Roller Fairlead
•Free Spooling

SPECIFICATIONS

Gear Train	Planetary
Gear Ratio	6:1
Motor	17.9 cubic inch
Control Pendant	Not Included, Requires 34 Series Kit
Cable	3/8” X 100’ (nominal 14,400 lbs) (9.53 mm X 30.5 m)
Drum Size	2.5” X 9” (63.5 mm X 228.6 mm)
Net weight	93 lbs (42.2 kgs)
Bolt Pattern	4 Bolt Pattern, 4.5” X 10”, (114.3 mm X 254 mm)
Power Steering Min. Requirements	3.5 GPM @ 1500 psi (13.25 L/m @ 103.4 bars)

PERFORMANCE

3.5 GPM @ 1500 PSI (13.25 L/m @ 103.4 bars)
Layer of Cable	1	2	3	4
Line speed-low gear (FPM)	5.65	6.43	7.41	8.58
Rated pull (lbs.)	10,500	8,500	7,400	6,400
Line speed-high gear (FPM)	31	36	42	48
Rated pull (lbs.)	1,600	1,300	1,200	1,000